Shenzhen RF connector manufacturer(1)

Shenzhen RF connector manufacturer ZOMWAVE, SMA RF connector series products have long life, good performance and high reliability. It is widely used in the configuration and connection of radio frequency coaxial cables or microstrips in the radio frequency circuit configuration of microwave and digital communications. The scale has reached the overall environmental protection level. The appropriate wireless AP is used by the antenna manufacturer.

After the N-type connector pair is connected, the outer conductor contact surface (electrical and mechanical reference surface) of the connector pair is tightened against each other by the tension of the thread, so as to achieve a small contact resistance (<5mΩ). The pin part of the conductor in the pin is inserted into the hole of the conductor in the jack, and good electrical contact between the two inner conductors at the mouth of the conductor in the jack is maintained by the elasticity of the jack wall (contact resistance <3mΩ).

In the entire radio frequency communication, it mainly includes the following frequencies, transmission frequency, receiving frequency, intermediate frequency and baseband frequency. The baseband frequency is the frequency of the signal used to modulate the data. The real transmission frequency is much higher than the baseband frequency. The general frequency spectrum ranges from 500MHz to 38GHz, and data signals are also transmitted at this high frequency. Generally speaking, the radio frequency system has a very powerful function of transmitting modulated signals. Even in the presence of interference signals and blocking signals, the system can transmit with high quality and receive modulated signals with good sensitivity.

The low frequency connector of the rf coaxial cable assembly refers to the electrical connector whose working frequency is lower than 3MHz. The low frequency connector mainly includes the circular connector, the rectangular connector, the printed circuit connector, and the disconnected connector. The circular connector is mainly used for the external connection between the device and the device. It is used to terminate the solid conductor multi-core cable with the cable, and the shape is cylindrical.

Related Articles:

1. Shenzhen RF connector manufacturer(2)